LOW FLOW ONE WAY CHECK VALVE

This is a low flow one way check valve. Helps prevent backflow when used properly. Using these one way valves will keep your equipment much cleaner. No more backflow into the hose or bag.

To use this one way valve properly you will want to put it as close to your nozzle as possible and make sure the arrow marked on the valve is going in the direction of the fluid flow. We recommed 6-12 inches from the end of the hose. You can also use two on one hose as a back up if you wish. One close to the bag on the hose and another close to the nozzle.

This is low flow one way check valve and reduces fluid flow by around 80%. This low flow one way check valve does create a consistent flow rate of about 0.5 quarts a minute whether the bag is high or low off the ground.

FOR USE WITH 5/16" INSIDE DIAMETER HOSE ONLY

This item should be cleaned before and after each use. Do not use water over 150 °F. We recommend castile soap and warm-hot water or regular or antibacterial soap that is free from dyes and or essential oils.

If using with coffee the good news is this one way check valve can be disassembled, cleaned and put back together.