HIGH FLOW ONE WAY CHECK VALVE

This is a high flow one way check valve. Helps prevent backflow when used properly. Using these one way valves will keep your equipment much cleaner. No more backflow into the hose or bag.

To use this one way valve properly you will want to put it as close to your nozzle as possible and make sure the arrow marked on the valve is going in the direction of the fluid flow. We recommed 6-12 inches from the end of the hose. You can also use two on one hose as a back up if you wish. One close to the bag on the hose and another close to the nozzle.

This is high flow one way check valve but in our tests it still reduces fluid flow by around 10%. Very minimal and not noticeable at all.

FOR USE WITH 5/16" INSIDE DIAMETER HOSE ONLY

NOT TO BE USED AS A BAG TO HOSE ADAPTER ON OUR 4 QUART BAGS

This item should be cleaned before and after each use. Do not use water over 150 °F. We recommend castile soap and warm-hot water or regular or antibacterial soap that is free from dyes and or essential oils.

If using with coffee make sure your coffee is well filtered as this one way check valve can't be disassembled.

These don't last forever and will wear out eventually or get too dirty to clean over time.